Specialities

Flexible connections for specific requirements:

The Speciality Range

In addition to the FRIAGRIP range we supply further mechanical connections which are adapted perfectly to each area of application.

FRIACLAMP

Repair Clamps

The Stainless Steel Repair Clamps are perfectly qualified for the repair of pipes made of steel, cast iron, asbestos cement and PVC. Due to its specific design, FRIACLAMP can be used under difficult environmental conditions and allows a time saving and simple installation. All bolts could be tightened on a defined torque due to the improved closing mechanism. The result is a save sealing, even on corroded pipe surfaces.

Ultra Range

Ultra Range

The flexible Ultra Range programme is predestined for the repair of fibre cement pipes. The patented seal bridges diameter deviations of max. 34 mm and thus may also be used for steel, cast iron, PVC and HD-PE*.

  • Maximum angle from pipe axle: 8°
  • Dimension ranges DN 50 to DN 300
  • Design as coupling and flange adapter

* When used with HD-PE pipes our internal supporting sleeve (SHVA) is required.

Dichtung

Wide Range

The seal from the Wide Range series bridges pipe diameter tolerances of max 17mm and is suitable for the same pipe materials as Ultra Range.

  • Maximum angle from pipe axle: 6°
  • Dimension ranges DN 50 to DN 600
  • Design as coupling, reducer coupling and flange adapter
Standard Range

Standard Range

Products of the standard range are manufactured individually according to specific project indications. The dimension range is DN 50 to DN 1500. The seal here is designed for each external diameter and bridges diameter tolerances of max. +/- 2 mm.

AQUAFAST

AQUAFAST

The products from the AQUAFAST range are used for the tension-proof repair of water pipes made from PVC or HD-PE where fusion cannot take place due to water leaks. There is no need for the standard internal suupporting sleeve due to defined pre-tension of the double O ring seal.

  • Dimension ranges d 63 to d 315
  • Design as coupling and flange adapter
  • Coupling as slide-on coupling, flange adapter may be used in connection with blind flange as tool for pressure tests.
AQUAGRIP

AQUAGRIP

The tension-proof AQUAGRIP flange adapters are used for the repair of HD-PE pipes in the d 315 to d 800 range. The required internal supporting sleeve is integrated into the construction part so it cannot be lost. Due to the type of construction a simple assembly is guaranteed even if water leaks out.